When Using Smart Circuit Breakers, Ensure the Surrounding Environment

In order to make the intelligent circuit breaker play its expected role, when using the intelligent circuit breaker, we should not only pay attention to its use method, but also pay attention to its use environment. Only by meeting the requirements of its use environment can it be used better. Talk about what environmental conditions it needs to have when using it.

Ambient temperature

The ambient temperature of the intelligent circuit breaker can be used normally at -5~40 degrees, but the performance of the device will definitely be greatly affected when the device is used at extreme temperatures such as -5 or 40 degrees, and the life will be rapidly lost, so the small The editor recommends that each customer try to choose the environment where the ambient temperature can be kept below 35 degrees every day, which can keep the equipment in a better environment and prolong the life of the device.

If you want to use it in an environment above -5 or 40 degrees, you must negotiate with the common equipment. If you force the device to operate normally in a short period of time, but the life and performance have almost reached the level of inferior products.

Altitude

I believe that customers all know that there will be hypoxia at high altitudes. This hypoxia phenomenon not only affects people, but also affects smart circuit breakers. Generally, the altitude where the device is installed is below 2000m The impact will not be great. When you use it at an altitude of 2500, the phenomenon of hypoxia is extremely obvious, and the insulation of the equipment will be rapidly reduced at this altitude. At this time, the safety of the operator cannot be guaranteed. It is very easy There is a security problem.

Humidity

The ambient humidity of using the smart circuit breaker is not constant, but varies according to the ambient temperature during installation. For example, if this product is used in an environment of 40 degrees, the moisture concentration in the air cannot exceed 50%. In the case of low temperature, the humidity can also be gradually increased. For example, when the humidity is used in an environment of 20 degrees, the equipment can operate normally under the condition that the humidity does not exceed 90%. If the humidity concentration is too high, condensation will occur inside the equipment. Phenomenon Once the water enters a certain part, the equipment may have faults such as leakage and short circuit and cannot operate correctly.

Of course, condensation does not occur only when the humidity is too high. Condensation also occurs when the temperature changes greatly. There is also a certain chance that condensation will have a considerable impact on the equipment. It is recommended that customers use Some other devices to deal with abnormal temperature or humidity to avoid the device being affected.

Pollution

Generally speaking, the pollution level that the intelligent circuit breaker can withstand is about level 3. The pollution situation exceeding this level will have a serious impact on the equipment. If it is used in this environment for a long time, it will only make the safety of the equipment and operators worse. affected.

For more information about oem vacuum circuit breaker,oem wifi circuit breaker,oem wifi controlled circuit breaker, we are glad to answer for you.